MC Faulty by Michał Cacko

Oscillator 1 timbre

Both sawtooth and square oscillators are enabled.

Pulse width of square oscillator is set to 50% (50% is perfectly square, 100% is very short pulsewave) and is modulated by LFO 2.

LFO 2 mod-matrix 3 modulation amount for pulse width of square oscillator is -14.

Oscillator 2 timbre

Volume level for oscillator 2 is manually set to 126.

Tone for oscillator 2 is off.

Volume (VCA) volume

Amplification level is set to 6dB (255) and is modulated by VCA Env, Ctrl Seq.

VCA Env direct modulation amount for amplification level is 255.

Pan spread is manually set to 60.

Oscillators ranges timbre

Oscillators 1 range is 8'.

Oscillators 2 range is 4'.

Noise timbre

Noise level is manually set to 94.

OSC 1→2 sync timbre

to be completed

Oscillator 2 is syncronized to oscillator 1. This generates rich harmonic content when changing oscillator's relative piches.

Oscillator 2 FM timbre

experimental

Oscillator 2 pitch is modulated by LFO 1, LFO 2.

LFO 1 direct modulation amount for oscillator 2 pitch is 255.

Low-pass filter (VCF) timbre

Low-pass filter cut-off frequency is set to 8787.89Hz (220) and is modulated by LFO 1, LFO 2.

LFO 1 mod-matrix 5 modulation amount for low-pass filter cut-off frequency is 15.

LFO 2 modulates LFO 1 (amount: 15), that in turn modulates low-pass filter cut-off frequency.

Low-pass filter envelope amount is modulated by Note Vel.

Note Vel direct modulation amount for low-pass filter envelope amount is 128.

Filter resonance is statically set to 28% (71).

Oscillator 1 pitch pitch

Oscillator 1 pitch modulation is modulated by Ctrl Seq.

Ctrl Seq mod-matrix 7 modulation amount for oscillator 1 pitch modulation is 28.

Oscillator 2 pitch pitch

Oscillator 2 pitch is set to 12 semitones and is modulated by LFO 1, LFO 2.

LFO 1 direct modulation amount for oscillator 2 pitch is 255.

Arpeggiator pitch

Arpeggiator rate is 105 bpm with a clock divider of 1/8 and is set to key synchronisation mode.

Arpeggiator gate is manually set to 0.

Arpeggiator mode is Up (0) over 2 octaves.

FX routing & levels fx

FX mode is set to Send, and routing is

Effect 1 level is manually set to 0. Effect 2 level is manually set to 100. Effect 3 level is manually set to 100. Effect 4 level is manually set to 150.

Multi-Band Distortion fx

not yet complete

Rotary Speaker fx

not yet complete

Hall Reverb fx

not yet complete

Delay fx

not yet complete


Note Vel modulator

Controls VCF Envelope Velocity Sensitivity.

functiontypedestinationamount
menu VCF Envelope Velocity Sensitivity 128

LFO 1 modulator

Controls OSC 2 Pitch, VCF Cut-off Frequency.

functiontypedestinationamount
pitch fader OSC 2 Pitch 255
timbre matrix VCF Cut-off Frequency 15
namevalue
LFO 1 Rate 14.54Hz (203)
LFO 1 Delay / Fade 0s (0)
LFO 1 Shape Triangle
LFO 1 Key Sync off
LFO 1 Arp Sync off
LFO 1 Mono Mode 1
LFO 1 Slew Rate 0

LFO 2 modulator

Controls OSC 1 Pulse Width Modulation Depth, Unison Detune, LFO 1 Rate, OSC 2 Pitch, VCF Cut-off Frequency.

functiontypedestinationamount
timbre matrix OSC 1 Pulse Width Modulation Depth -14
timbre matrix Unison Detune 23
matrix LFO 1 Rate 127
pitch fader-indirect OSC 2 Pitch 255
timbre indirect VCF Cut-off Frequency 15
namevalue
LFO 2 Rate 0.54Hz (89)
LFO 2 Delay / Fade 0s (0)
LFO 2 Shape Sine
LFO 2 Key Sync off
LFO 2 Arp Sync off
LFO 2 Mono Mode 1
LFO 2 Slew Rate 129

VCA Env modulator

Controls VCA Gain for All Voices.

functiontypedestinationamount
volume menu VCA Gain for All Voices 255
namevalue
VCA Envelope Attack Time 0s (0)
VCA Envelope Decay Time 0s (0)
VCA Envelope Sustain Level 0% (0)
VCA Envelope Release Time 0.96s (116)
VCA Envelope Trigger Mode Key (0)
VCA Envelope Attack Curve 128
VCA Envelope Decay Curve 0
VCA Envelope Sustain Curve 128
VCA Envelope Attack Curve 0

Ctrl Seq modulator

Controls OSC 1 Pitch Modulation Depth, VCA Env Decay Time, VCA Gain for All Voices.

functiontypedestinationamount
pitch matrix OSC 1 Pitch Modulation Depth 28
volume matrix VCA Env Decay Time 127
volume menu-indirect VCA Gain for All Voices 255
namevalue
Ctrl Sequencer Enable on
Ctrl Sequencer Clock Divider 10
Sequence Length 14
Sequencer Swing Timing 0
Key Sync & Loop 0
Slew Rate 0
Seq Step Value 1 254
Seq Step Value 2 141
Seq Step Value 3 206
Seq Step Value 4 149
Seq Step Value 5 182
Seq Step Value 6 128
Seq Step Value 7 255
Seq Step Value 8 128
Seq Step Value 9 163
Seq Step Value 10 196
Seq Step Value 11 128
Seq Step Value 12 213
Seq Step Value 13 170
Seq Step Value 14 128